Faxing or emailing individual images – Kodak I7300 User Manual

Page 128

Advertising
background image

7-12

A-61133 March 2003

•

Enable Fax Header Page if you want the header page printed along
with your fax. The default is no Fax Header Page.

•

The fax will be delivered when you send it if you do not enable the
Time option and enter a specific time.

•

The fax will be delivered when you send it if you do not enable the
Date option and enter a specific date.

•

If the date is prior to the current date (even if it is set to a future year),
the fax will be sent immediately.

Faxing or emailing
individual images

To fax or email an individual image immediately:

1. If not already connected, connect to a VNN and Fax/eMail via the

Navigate>Image Server>Connect… menu option.

2. Retrieve the desired image using the scanner.

3. Select Navigate>Image Server>Fax/eMail from the menu.

4. Fill the necessary information in the Fax/eMail dialog box. (See the

section entitled “The Fax/eMail dialog box” in this chapter.)

5. Click OK when finished.

6. Repeat Steps 2 through 5 for each individual image to be faxed or

emailed. (Images may be retrieved from various rolls of film.)

7. Optionally disconnect when finished via Navigate>Image Server>

Disconnect.

To fax or email a sequence of images immediately, from the same roll of
film:

1. If not already connected, connect to a VNN and Fax/eMail via the

Navigate>Image Server>Connect… menu option.

2. Retrieve the first image of the sequence using the scanner.

3. Select Navigate>Image Server>Fax/eMail Chapter from the

menu.

•

If you are using Level 1 film, the requested image and every
subsequent image to the end of the film will be printed.

•

If you are using Level 2 or Level 3 film and the requested image
is a chapter level or page level image, the requested image and
every subsequent image to the end of the chapter will be printed.

•

If you are using Level 3 film and the requested image is a book
level image, only the requested image will be printed.

NOTE: To stop at a specific image, press the Clear key on the

keypad and click Abort on the displayed message box after
the image is displayed.

4. Fill the necessary information in the Fax/eMail dialog box. (See the

section entitled “The Fax/eMail dialog box” in this chapter.)

Advertising