Kodak I7300 - Manual (Page 53)

3-6 A-61133 March 2003
NOTE: If you want to change the path of the folder where images
will be saved, and/or the conventions to be used for naming
files, select Setup from the Batch Scan dialog box to
display the Setup Naming dialog box.
•
Enter the path in the root directory text box, or click the
Change… button to select the desired directory.
•
Change file naming conventions if desired.
•
Click OK to save the change.
More information regarding root directory and file naming conventions is
found in the section entitled “Changing Naming Convention Properties”
in Chapter 4.
IMPORTANT: Improper setup of root directory and file naming
conventions can cause image files to be overwritten
without notification.
2. Enter the addresses (or sequence numbers) of the images to be
processed in the Enter Image Range field. Individual addresses can
be entered, and/or a range(s) of addresses. Use a dash to separate
the start and end values of a range, and a semicolon to separate
individual addresses and ranges.
Following are some examples:
•
To enter multiple ranges for 1 level film: 1-5;7-9
•
To enter multiple ranges for 2 level film, including individual
addresses: 1.0-1.5;3.0;4.10-4.30
NOTE: To accommodate European keyboards, a comma can be
used in place of a period in an address, e.g., 1,0-
1,5;3,0;4,10-4,30.