Kodak I7300 - Manual (Page 137)

A-61133 March 2003 A-7
Film leader — M-type
magazine When using an M-type magazine, a 31.5 in. (800 mm) leader must be
affixed to the film. The following criteria should also be met:
•
The leader must be square to the attached film.
•
The first film images should not be closer than 16 in. (400 mm) from
the leader-film splice location.
•
The leader must be clean and in good condition (free of creases,
burrs, bends, etc.).
•
Only transparent leader tapes can be used.
Film trailer — ANSI
magazines When using an ANSI magazine, use a trailer end holder to fix the film
end to the supply reel. The following criteria should also be met.
•
Be sure to wind the film onto the supply reel in the correct direction.
•
The film trailer must contain no images and must be at least 18 in.
(450 mm) long as measured from the supply reel to the last image
on the film.