Klipsch DVD Audio/Video System CS-700 - Manual (Page 12)

Press MENU on your Klipsch system remote control (the main menu appears). 1.
Press arrow down ç to highlight Setup and press ENTER (the Setup menu
items appear).
Match the on-screen option with the cables that are connected to each of the
jacks on your Klipsch system. This information tells the system what is connected
to it, and which cables and jacks were used.
2.
TV Audio Connection: If you made a TV Audio connection, use the arrow
button to select where you connected the TV’s AUDIO OUTPUT to the Klipsch
system’s AUDIO INPUT. Use the
å or ç arrow button to highlight the correct
option and press ENTER .
3.
Note: If you connected the audio from the tV's AuDIo outPut jacks to the Klipsch
system, you'll need to turn off your tV's internal speakers and may need to adjust
the audio setting in the tV's menu system. Locate your tV manual to get specific
instructions, as the procedures differ for different brands and types of televisions.
STeP 9: Complete the On-screen Setup
SAT/CABLE/HD: Choose this option if you connected audio from the
TV to one of the three AUDIO INPUT options in the SAT/CABLE/HD INPUT
section on the back of the Klipsch system.
AUX 1: Choose this option if you connected audio from the TV to one of
the audio options in the AUX 1 INPUT section on the back of the Klipsch
system.
AUX 2: Choose this option if you connected the TV’s audio to one of the
AUX 2 INPUT audio options on the side of the Klipsch system.
No Audio Connection: Choose this option if you didn’t connect the
audio from the TV to the Klipsch system.
You’ll only hear audio from the
Klipsch system when you’re playing the radio or a disc, or through one of
the components connected to the Klipsch System (e.g., VCR, DVD Recorder,
mp3 player, etc.).