Klipsch DVD Audio/Video System CS-700 - Manual (Page 14)

Your Klipsch Controller
DVD P.SCAN MP3 WMA MPEG4 JPEG ANGLE TITLE TRK CHAP
A B ALL
PROG
CD RANDOM DOLBY
D I G I T A L
The display on the front of your Klipsch system provides playback
information. The display illuminates each option that is active for the type of
media you are playing. The numbers on the display let you know the track,
title, and/or chapter number of the disc. Additionally, information from the
radio’s RDS (Radio Data System), such as artist and track information, is
displayed when you’ve tuned to the radio function. Below are explanations of
display messages you may encounter that may not be covered in other parts
of this manual.
Dolby® Digital
The trademarked marketing name for Dolby Laboratories’ AC-3 codec. The
common version contains six total channels of sound, with five channels
for normal-range speakers (Right Front, Center, Left Front, Right Rear and
Left Rear) and one channel for the subwoofer. The Dolby Digital format also
supports Mono and Stereo. Your Klipsch system supports Dolby Digital with
its 2.1 audio system design.
DTS (Digital Theatre Systems)
A multi-channel surround sound format (rival of Dolby Digital). With DTS, the
encoders and decoders support numerous channel combinations and stereo.
DTS contains four-channel+LFE (Low Frequency Effects) audio tracks. Digital
Theatre Systems was the name of the company that developed this format
(currently referred to as DTS). Film director Steven Spielberg was one of the
company’s initial investors. Spielberg films use the DTS audio format.
P.SCAN (Progressive Scan)
Lights if the P.SCAN switch on the back of the Klipsch system is in the ON
position.
SOURCE
PRESETS
PLAY/PAUSE
OPEN/CLOSE
POwER
VOLUME
å TUNINg ç
Chooses the function you want to use—radio,
DVD/CD, watch TV, access any other components
connected to your Klipsch system (VCR, video game
system, etc.). Each time you press the
SOURCE
button, it goes to the next “Input” that corresponds
to the component that’s connected to that
input
jack on the back of your Klipsch system.
When listening to the radio, this button moves to the
next radio station that you programmed into the
preset memory.
Plays discs in disc tray, and pauses playback
when a disc is playing.
Opens and closes the disc tray.
Turns your Klipsch system on and off.
Adjusts the volume.
Changes radio station. Specific functionality of these
buttons can be selected in the tuner setup menu. з
з
Display
SOURCE TUNINg PRESETS VOLUME з
з
PLAY/PAUSE OPEN/CLOSE
Buttons
POwER
з
з
з
з