Resetting to defaults -46, If you – Kodak 6B8773 User Manual
Page 114
Advertising
5-46
April 28, 2004
Configuring your Camera
Resetting to Defaults
NOTE: This feature is available for lenses that you added from the master
list. It is not available for lenses that you have defined.
You can reset strength values for a lens in the user list to the values in the
master list.
1. Choose Lens Optimization from the Capture menu, then highlight the
lens in the user list.
2. Press the right side of the Five-way control to display the Strength
screen.
3. Choose Reset to Default.
4. Press the OK button.
Advertising