Kodak 6B8773 - Manual (Page 172)

11-4 April 28, 2004
Working with Images on the Camera
Zoom Mode
The selected image appears with a region of interest (ROI) box and a
highlighted center square. The region of interest box includes the area of
the image that appears when you zoom in.
NOTE: You can only Zoom Raw image files. Zoom Mode is not available
when reviewing JPG files
Enabling or Disabling the
Region of Interest Box • Press the OK button to enable the region of interest box.
You can pan or zoom when the region of interest box is enabled.
• Press the Cancel button to disable the region of interest box.
You can navigate to a different image when the region of interest box is
disabled.
Zooming • With the region of interest box enabled, press the OK button.
There are three zoom levels. The first actuation zooms to 1:4 (one pixel
displayed for every four in the image), the second to 1:1, and the third
returns to the un-zoomed 1:16.
NOTE: When zoomed to 1:1, the crosshairs appear but the region of
interest box does not. You can still pan.
Panning • With the region of interest box enabled, press any side of the Five-way
control.
If you reach the edge of the thumbnail, the image moves in the opposite
direction.