Kodak 6B8773 - Manual (Page 151)

April 28, 2004 8-1
8
Focusing
You can set up your KODAK PROFESSIONAL DCS Pro SLR/c Digital Camera
(DCS Pro SLR/c) to focus automatically (described below) or, in situations
where autofocus or focus lock are not effective, you can focus manually
(see
page 8-5 ).
Autofocus
With autofocus, the camera does much of the work required to properly
focus an image.
NOTE: You can only use Autofocus with AF Lenses. With mirror lenses and
some specialized lenses, you can use the camera only in Manual
Focus mode.
Autofocus Modes Your camera has two autofocus modes:
Single AF with Focus Priority—When you lightly press the Shutter
button, focus tracking occurs until the subject stops moving. Focus then
locks, and the focus indicator appears in the Viewfinder. You cannot release
the shutter until focus locks.
Continuous AF with Release Priority—When you lightly press the
Shutter Release button, focus tracking occurs until you release the button.
Setting Autofocus
1. Set the lens’ Focus Mode switch to AF.
2. Lightly press the Shutter button and autofocus starts. When it
completes, check the sharpness of the subject on the focusing screen.