Kodak 6B8773 - Manual (Page 64)

4-12 April 28, 2004
The Basics
13. Choose Firmware from the Basic menu, then highlight Update.
14. Press the OK button.
A progress screen appears while the firmware is updating. The update
takes about 30 seconds.
IMPORTANT: After the firmware has been written to the camera
memory, the camera reboots and loads the new
firmware. This may take up to fifteen seconds, during
which time the camera does not appear to be
functioning. Do not adjust camera controls or turn the
camera off and on while the rebooting procedure is in
progress.
15. When the Image LCD turns back on, press the OK button to
acknowledge the update message.
16. Repeat steps 12 - 14 to update the second firmware copy in your
camera. When this second update completes, you will not receive the
firmware update message.