Kenwood KRF-V4550D - Manual (Page 11)

11
Preparations
Digital connections
COAXIAL
DIGITAL
OUT
(AUDIO)
Optical fiber cable
Connect the video signal and analog
audio signals to the VIDEO2/MONI-
TOR jacks.
(See "Connecting video compo-
nents".)
DOLBY DIGITAL RF OUT (AUDIO)
COAXIAL DIGITAL OUT (AUDIO)
LD player
RF digital demodula-
tor (DEM-9991D)
(sold separately)
PCM OUT
CD player
Component with a Dolby Digital, or
PCM COAXIAL DIGITAL OUT
OPTICAL DIGITAL OUT
(AUDIO)
Setting up the system
The digital in jacks can accept Dolby Digital, or PCM signals. Connect components capable of outputting Dolby
Digital, or standard PCM (CD) format digital signals.
If you have connected any digital components to the receiver, be sure to read the "Input mode settings" section
carefully.
7
To connect an LD player with a DIGITAL RF OUT, connect the LD player to the KENWOOD RF digital demodulator (DEM-9991D).
Next, connect the DIGITAL OUT jacks of the demodulator to the DIGITAL IN jacks of the receiver.
Connect the video signal and analog audio signals to the VIDEO2/MONITOR jacks. (See "Connecting video components".)
*4967/01-/EN 3/19/01, 6:34 PM 11