Kenwood KRF-V4550D - Manual (Page 5)

5
Preparations
Display
Speaker selection indicators
Input channel indicators
Output channel indicators
Band indicators
AUTO indicator
MEMO. indicator
ST. indicator
TUNED indicator
3 STEREO indicator
STEREO indicator
Names and functions of parts
Frequency display,
Input display,
Preset channel display,
Surround mode display
Speakers' indicator
PRO LOGIC
indicator
S.DIRECT indicator
MONITOR indicator
MUTE indicator
AUTO SOUND indicator DIGITAL indicator
Standby mode
While standby indicator is lit, this receiver is in standby mode and consumes a small amount of current for back-up. This system can be switched ON by using the remote
control.
1 POWER key ^
Use to switch the main power ON/OFF.
2 ON/STANDBY ( ) key ^
Use to switch the power ON/STANDBY when
the POWER is turned ON.
STANDBY indicator
3 MULTI CONTROL key ^
Use to control a variety of settings.
4 SET UP key ^
Use to select speakers' settings etc.
5 Surround indicators
DOLBY DIGITAL indicator §
Lights when the receiver is in the Dolby
Digital mode.
PRO LOGIC indicator
§
Lights when the receiver is in the PRO LOGIC
mode.
3 STEREO indicator
§
Lights when the receiver is in the 3 STEREO
mode.
6 INPUT MODE key 7
Use to switch between the digital and analog
inputs.
7 DIMMER key )•
Use to adjust the brightness of the display.
Use to select the REC MODE.
8 MONITOR key (
Use to monitor the source that is connected
to the VIDEO2/MONITOR jack.
9 VOLUME CONTROL knob *
0 PHONES jack (
Use for headphone listening.
! SPEAKER key &
Use to turn the speaker ON/OFF.
MUTE key
(
Use to temporarily mute the sound.
@ SOUND key ¶
Use to adjust the sound quality and ambience
effects.
# BAND key ¡
Use to select the broadcast band.
$ AUTO key ¡
Use to select the auto tuning mode.
% LISTEN MODE key §
Use to select the listening mode.
^ MEMORY key ™
Use to store radio stations in the preset
memory.
& SOURCE DIRECT key (
Use to pass the source material direct to the
amplifier.
* INPUT SELECTOR knob *
Use to select the input sources.
RDS indicators DOWN MIX indicator
*4967/01-/EN 3/19/01, 6:33 PM 5