Kenwood KRF-V4550D - Manual (Page 12)

12
Preparations
Setting up the system
Connecting the antennas
AM antenna terminal connections
1 Push lever. 2 Insert cord.
AM loop antenna
The supplied loop antenna is used for indoors. Place it as far as possible
from the receiver, TV set, speaker cords and power cord, and adjust the
direction for best reception.
3 Return lever.
AM loop antenna
FM indoor antenna
FM outdoor antenna Use an antenna
adaptor
(Commercially
available)
FM indoor antenna
The supplied indoor antenna is for temporary use only. For stable signal
reception we recommend using an outdoor antenna. Disconnect the
indoor antenna when you connect one outdoors.
Attach to the stand
Insert cord.
FM antenna terminal connections
FM outdoor antenna
Lead the 75 Ω coaxial cable connected to the FM outdoor antenna into the
room and connect it to the FM 75 Ω terminal.
*4967/01-/EN 3/19/01, 6:34 PM 12