Kyocera 5135 - Manual (Page 7)

User Guide for the Kyocera 5135 Phone 1
1 G ETTING S TARTED
This document describes the Kyocera 5135 trimode
phone, with CDMA digital service at 800 MHz and
1900 MHz, and analog service at 800 MHz.
Your phone comes with a removable lithium ion
(LiIon) battery.
Installing the battery
1. Hold the phone face down.
2. Place the battery in the phone casing, with the
metal contacts facing down and toward the
bottom of the phone.
3. Push the battery until it clicks into place.
4. Fully charge the battery before using the
phone.
Charging the battery
The battery is partially charged when you receive
your phone. You must have at least a partial charge
in the battery to make or receive calls, regardless of
whether or not the charger or adapter is connected
to the phone.
To charge the battery, connect
the charger or adapter to the
jack on the bottom of the
phone, then connect the plug
to a wall outlet.
The battery icon in the upper-right corner of the
screen tells you whether the phone is:
• Charging (the icon is animated)
• Partially charged
• Fully charged
Recharging the battery
You can safely recharge the battery at any time,
even if it has a partial charge.