Kyocera 5135 - Manual (Page 35)

User Guide for the Kyocera 5135 Phone 29
5 C USTOMIZING Y OUR P HONE
Setting vibrate mode
You can set the phone to vibrate or to vibrate and
then ring when you receive an incoming call.
1. Select Menu → Settings → Sounds →
Call Ring/Vibe .
2. Select Ring only, Vibrate only, or
Vibrate then ring.
Silencing all sounds
There is a quick and easy way to silence all sounds
(including alert beeps, rings, and keypress beeps)
and to set your phone to vibrate for incoming calls,
alerts, and menu navigation.
• From the home screen, press
right and
hold. Notice that a appears on the screen,
indicating the phone has silenced all sounds.
Specifying just vibration or just lights
1. Select Menu → Settings → Silence All .
2. Select Yes, vibe only.
3. Press to save your selection.
Note: The phone will ring when it is attached to an
external power source (such as a charger), even if
the Silence All setting is selected.
Turning sounds back on
The quickest way to turn sounds back on is to press
right and hold.
You can also use menus:
1. Select Menu → Settings → Silence All .
2. Select No, normal .
3. Press to save your selection.
Choosing a different ringer
Your Kyocera 5135 phone has several ringers you
can choose from for your incoming calls.
1. Select Menu → Settings → Sounds →
Ringer Type .
2. Scroll down the list to hear the different rings.
3. Press to select a ringer from the list.
Note: Use caution in bringing the phone close to
your ear while sample ringers are playing.