Kenwood KRF-V5200D - Manual (Page 25)

English
25
Surround play
Select the listen mode according to the source being played back.
LISTEN MODE VOLUME CONTROL
VOLUME /o
LISTEN MODE
Preparations
• Turn on the related components.
• Complete <Speaker settings>.
^
• Select the source you wish to play back with
surround sound.
• Select the input mode (analog or digital) for
the source you wish to playback. (Noise may be
produced when a DTS source is played by selecting
the analog input.)
)
œ Start playing the video software.
∑ Press [LISTEN MODE] to select the listen mode.
The listen mode settings are stored separately for
each input. If the input mode is set to full auto ("AUTO
DETECT" lights), the unit selects the optimal listen mode
automatically based on the type of input signal and the
speaker settings.
Each press of [LISTEN MODE] switches the setting as
listed.
When the Dolby Digital signal is input:
Display Listen mode Indicator
"DOLBY DIGITAL" Dolby Digital surround mode "DOLBY DIGITAL"
"PL II MOVIE"* Pro Logic II surround Movie mode
"DOLBY DIGITAL"
and "PRO LOGIC"
"PL II MUSIC"* Pro Logic II surround Music mode
"DOLBY DIGITAL"
and "PRO LOGIC"
"PL II GAME"* Pro Logic II surround Game mode
"DOLBY DIGITAL"
and "PRO LOGIC"
"PRO LOGIC"* Pro Logic mode
"DOLBY DIGITAL"
and "PRO LOGIC"
"STEREO" Stereo mode "DOLBY DIGITAL"
* Available when the input signal has only 2 channels.
When "Dolby Digital" is selected:
"DOLBY DIGITAL" will scroll from right to left.
When the DTS signal is input:
Display Listen mode Indicator
"DTS" DTS 5.1 channel surround mode "DTS"
"STEREO" Stereo mode "DTS"
When "DTS" is selected:
When the analog signal or digital signal (except for
Dolby Digital or DTS signal) is input:
Display Listen mode Indicator
"PL II MOVIE" Pro Logic II surround Movie mode "PRO LOGIC"
"PL II MUSIC" Pro Logic II surround Music mode "PRO LOGIC"
"PL II GAME" Pro Logic II surround Game mode "PRO LOGIC"
"PRO LOGIC" Pro Logic mode "PRO LOGIC"
"ARENA" DSP surround ARENA mode "DSP MODE"
"JAZZ CLUB" DSP surround JAZZ CLUB mode "DSP MODE"
"THEATER" DSP surround THEATER mode "DSP MODE"
"STADIUM" DSP surround STADIUM mode "DSP MODE"
"DISCO" DSP surround DISCO mode "DSP MODE"
"STEREO" Stereo mode ––
é Adjust the volume.
Notes:
• Depending on the type of the signal or speaker setting, some
listen modes cannot be selected.
• When playback is started, the sound may be cut or interrupted
before the input source is confirmed as Dolby Digital.
• To enjoy Dolby Digital surround (as well as all the other listen
modes) from a single component, be sure to use a Dolby Digital
compatible source component.
• Dolby Digital or DTS signal having more channels than the
maximum number of playback channels available using this unit’s
current settings is input, downmixing is performed to match the
number of available channels.