Kenwood KRF-V5200D - Manual (Page 38)

38
English
Specifications
AUDIO section
Rated output power during STEREO operation
(63 Hz – 12.5 kHz, 0.7% T.H.D., at 6 Ω) .............100 W + 100 W
Effective output power during STEREO operation
RMS (1 kHz, 10% T.H.D., at 6 Ω) ......................... 120 W + 120 W
Effective power output during SURROUND operation
FRONT
(1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven) 100 W + 100 W
(1 kHz, 10 % T.H.D. at 6 Ω one channel driven) 120 W + 120 W
CENTER
(1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven) .............. 100 W
(1 kHz, 10 % T.H.D. at 6 Ω one channel driven) ............... 120 W
SURROUND
(1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven) 100 W + 100 W
(1 kHz, 10 % T.H.D. at 6 Ω one channel driven) 120 W + 120 W
Total harmonic distortion .............................0.05 % (1 kHz, 50 W, 6 Ω)
Frequency response (IHF’66)
CD/DVD .....................................20 Hz – 70 kHz, +0 dB – –3.0 dB
Signal to noise ratio (IHF’66)
CD/DVD
..............................................................................100 dB
Input sensitivity / impedance
CD/DVD, AUX, MD/TAPE, VIDEO 1, VIDEO 2 .... 550 mV / 40 kΩ
AV AUX ................................................................ 550 mV / 50 kΩ
DVD/6CH INPUT ................................................. 550 mV / 27 kΩ
Output level / impedance
REC OUT (MD/TAPE, VIDEO 1) ........................... 550 mV / 470 Ω
PRE OUT (SUBWOOFER) ........................................ 1.5 V / 1.5 kΩ
Tone control
BASS ............................................................... ±10 dB (at 100 Hz)
TREBLE ........................................................... ±10 dB (at 10 kHz)
DIGITAL AUDIO section
Sampling frequency .................32 kHz, 44.1 kHz, 48 kHz, 96 kHz
Input level / wave length
Optical ......................... –15 dBm – –21 dBm / 660 nm ±30 nm
Input level / impedance
Coaxial ...............................................................0.5 Vp-p / 75 Ω
VIDEO section
VIDEO inputs / impedance
VIDEO (composite) ..............................................1 Vp-p / 75 Ω
VIDEO outputs / impedance
VIDEO (composite) ..............................................1 Vp-p / 75 Ω
COMPONENT VIDEO inputs/ impedance (For Australia)
COMPONENT VIDEO (Y-signal) ...........................1 Vp-p / 75 Ω
COMPONENT VIDEO (CB/ CR-signal) ...............0.7 Vp-p / 75 Ω
COMPONENT VIDEO outputs/ impedance (For Australia)
COMPONENT VIDEO (Y-signal) ...........................1 Vp-p / 75 Ω
COMPONENT VIDEO (CB/ CR-signal) ...............0.7 Vp-p / 75 Ω
FM tuner section
Tuning frequency range .......................... 87.5 MHz – 108.0 MHz
Usable sensitivity (DIN at 75 Ω)
MONO .................. 1.3 μV / 13.2 dBf (40 kHz DEV., S/N 26 dB)
STEREO ................. 45 μV / 42.1 dBf (46 kHz DEV., S/N 46 dB)
Total harmonic distortion (DIN at 1 kHz)
MONO .................................................... 0.2% (71.2 dBf input)
STEREO .................................................. 0.8% (71.2 dBf input)
Signal to noise ratio (DIN weighted at 1 kHz)
MONO ............................ 65 dB (40 kHz DEV., 71.2 dBf input)
STEREO ........................... 60 dB (46 kHz DEV., 71.2 dBf input)
Stereo separation (DIN 1 kHz) ............................................36 dB
Selectivity (DIN ±300 kHz) .................................................64 dB
Frequency response (30 Hz – 15 kHz) ............. +0.5 dB, –3.0 dB
AM tuner section
Tuning frequency range ............................. 531 kHz – 1,602 kHz
Usable sensitivity (30% mod., S/N 20 dB) .... 16 μV / (600 μV/m)
Signal to noise ratio (30% mod.)
...................................................... 50 dB (60 dBμV EMF input)
General
Power consumption ........................................................... 250 W
Standby power consumption ............................. less than 0.6 W
Dimensions ...............................................W: 440 mm (17-5/16")
....................................................................H: 159 mm (6-1/4")
................................................................. D: 343 mm (13-1/2")
Weight (net) ......................................................... 8.1 kg (17.9 lb)
Notes:
1. Kenwood follows a policy of continuous advancements in
development. For this reason specifications may be changed
without notice.
2. The full performance may not be exhibited in an extremely cold
location (under a water-freezing temperature).