Kenwood DNX6980 - Manual (Page 45)

44 44
Return to the Top page
Radio, HD Radio, SIRIUS, XM
Radio/HD Radio Basic Operation
Most functions can be controlled from the source control screen.
NOTE
• Set the remote controller mode switch to AUD mode before starting operation, see Switching the operation
mode (P.91) .
• Ready to receive HD Radio™ broadcasts when connected to the KTC-HR300/KTC-HR200, sold separately.
• HD Radio is for North American sales area only.
• The screen shot below is for tuner. It may be different from the one for HD Radio.
2
1
3 3 4 4 5 8
6
2
7
Simple Control screen List Control screen
1 PS/Station name display
Displays the PS name or station name.
2 Information display/Control switching area
Displays the following information.
• [FM1] etc.: Band display
•
MHz/kHz: Frequency display
• Preset #: Preset number
• HD# (HD Radio only): Channel display
Touch to switch between the Simple Control and List Control screen.
3 Multi function key
Touch to switch the multi function menu. For details on the menu, see
Multi function menu (P.45) .
4 Preset key/Multi function menu
Recalls the memorized station or channel. When touched for 2 seconds, stores the current receiving
station or channel in memory.
When switched, various functions can be performed by using keys in this area.
For details on the menu, see
Multi function menu (P.45) .
5 Sub function key
Touch to display “Sub function menu” (7 in this table).
6 Preset list
Displays the list of preset stations or channels and the information.
R
adio, HD Radio™ And Satellite Radio Operation