Kenwood DNX6980 - Manual (Page 8)

7
Return to the Top page
Basic Operations
Number Name Motion
1
fi (Reset) • If the unit or the connected unit fails to operate properly, the unit
returns to factory settings when this button is pressed (P.97) .
• If the SI function is turned on, this indicator flashes when the vehicle
ignition is off (P.72) .
2
ATT • Switches attenuation of the volume on/off.
• North America Sales area: Pressing for 1 second stores the tag data of
the current music from HD Radio (P.51) .
• Central and South America sales area: Pressing for 1 second turns the
screen off.
3
∞, 5 (Vol) Adjusts volume.
Holding down a key turns up the volume in series up to 25. For more than
25, pressing the key turns up the volume one by one.
4
AUD • Displays Graphic Equalizer screen (P.86) .*
• Pressing for 1 second switches camera view display on/off.
5
NAV • Displays the navigation screen.
• Pressing for 1 second switches AV out sources.
• When the power off, turns the power on.
6
MENU • Displays the Top Menu screen (P.14) .
• Pressing for 1 second turns the power off.
• When the power off, turns the power on.
7
TEL • Displays the Hands Free screen (P.55) .
• Pressing for 1 second displays the Screen Control screen.
• When the power off, turns the power on.
8
0 (Eject) • Ejects the disc.
• Pressing for 1 second opens the panel to the location of the disc slot.
When the panel is opened, pressing for 1 second closes the panel and
pressing for 3 seconds ejects the disc forcibly.
• When the panel is closed, pressing for 3 seconds fully opens the panel to
the location of the SD card slot.
9
Remote
Sensor Receives the remote control signal.
You can enable or disable this feature by Remote Sensor
(P.71) .
10
Disc insert
slot A slot to insert a disc media.
11
SD card slot An SD card slot for upgrading the map. For how to upgrade the map, refer
to the instruction manual of the navigation system.
* The display may not switch to the Graphic Equalizer screen in some conditions.