Kenwood DNX6980 - Manual (Page 82)

81
Return to the Top page
Audio Setting Up
NOTE
• Each operation in this section can be started from
the multi function menu.
You can adjust the various settings such as
audio balance or subwoofer level.
1
Touch [Menu] on any screen.
2
Touch [Audio].
Audio screen appears.
See the following section for each setting.
• Setting audio (P.81)
• Controlling audio (P.84)
• Controlling equalizer (P.85)
• Performing zone control (P.87)
• Set space enhancer (P.88)
• Set listening position (P.88)
Setting Audio
1
Touch [Audio SETUP].
Audio SETUP screen appears.
See the following section for each setting.
• Set up speakers (P.81)
• Set up your car type (DTA) (P.83)
• Select DSP (P.84)
Speaker Select screen appears.
• Set up speakers (P.81)
Speaker setup
You can select a speaker type and its size to
get the best sound effects.
When the speaker type and size are set, the
speaker crossover network and equalizer
curve are set automatically.
1
Touch [Speaker Select] in the Audio
SETUP screen.
Speaker Select screen appears.
2
Touch the speaker you wish to adjust
and set each item as follows.
Subwoofer
Select if you are using a subwoofer.
Tweeter
You can set the tweeter when you are
selecting front speakers.
If you are using a tweeter together with the
front speakers, set the tweeter to “ON”.
In the “ON” position, the Equalizer is adjusted to
its best position.
X’over
Displays the speaker crossover setup screen.
You can adjust the crossover setup that was set
automatically when you selected the speaker type.
For details, see
Crossover network setup (P.82)
C
ontrolling Audio
Continued