KTI Networks KF223TX - Manual (Page 13)

may be included in the driver diskette after this guide is published.
Please refer to the \README.DOC file first for the latest informa-
tion before you install any drivers.
3.2 PCI BIOS Setup
Before installing the driver, it is recommended to run the system PCI
BIOS setup utility to check each PCI slot that contains a Fast Ethernet
PCI adapter for the following PCI settings:
1. Enable/disable the PCI slot : make sure the PCI slot is enabled
for the adapter.
2. Assign an IRQ number : make sure the IRQ number does not
conflict with other add-in adapters.
3. Enable bus mastering : the PCI slot must be enabled for bus
mastering.
On a PCI plug-and-play system, the PCI BIOS automatically config-
ures the adapter, so there is no user action needed.
Note:
* When the PCI adapter is installed in some PCI computers with
EISA slots, you must run the EISA configuration utility. If the
utility is not available, consult your computer supplier.
8