KTI Networks KF223TX - Manual (Page 6)

1. Introduction
The 10/100BASE-TX Fast Ethernet PCI Adapter is a 32-bit LAN
adapter for use in personal computers with PCI computer bus slots.
This adapter is a dual-speed adapter and features one RJ-45 connec-
tor for either a 10 Mbps or a 100 Mbps IEEE 802.3 Ethernet network
connection over unshielded twisted-pair (UTP) cable. The adapter
automatically senses the connection speed, switches to either 10 Mbps
or 100 Mbps and indicates the link status on the LEDs.
1.1 Adapter Features
The features of the 10/100 Fast Ethernet PCI adapter are:
• High performance bus master operation with low processor
utilization
• Automatically senses 10 Mbps or 100 Mbps connection
• Supports auto-negotiation for the connection speed and duplex mode
• PCI revision 2.0 or later compliance, 32-bit PCI half-card
• Three status LEDs
• Optional RPL Boot ROM for network operating systems
• Supports 100BASE-TX connection with UTP Category 5 cabling
• Supports 10BASE-T connection with UTP Category 3, 4, or 5
cabling
• Setup software for quick driver installation and diagnostics
1