KTI Networks KF223TX - Manual (Page 16)

Starting the Setup Program
To start the Setup program, follow these steps:
1. Insert the adapter driver diskette labeled "1 of 2" into floppy disk
drive A:.
2. Execute the following command from DOS prompt:
A>SETUP <enter>
A screen appears showing a menu bar on top of the screen and an
information window for the first adapter found in the computer on the
bottom portion of the screen as illustrated in the following figure:
Figure 4-2 Adapter Information
When Multiple Adapters are installed
If multiple adapters are found, you may press [PgDn] or [PgUp] to
browse the information of each adapter and select a adapter for the
optional menus (Setup and Diagnostics).
11