KTI Networks KF223TX - Manual (Page 7)

1.2 Connector and LEDs
Figure 1-1 shows the connector and LEDs on the adapter. The fol-
lowing table describes these components.
No. Components Description
1 10/100 Mbps This RJ-45 connector requires UTP
network connector cable for 10Mbps or 100 Mbps
connection.
2 100Mb Link LED This LED lights when 100 Mbps
connection is selected and active.
3 10Mb Link LED This LED lights when 10 Mbps
connection is selected and active.
4 Activity status LED This LED indicates a receive or a
transmission is in process.
Figure 1-1 Network Connector and LEDs
2