Kenwood TH-G71E - Manual (Page 34)

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
28
PROGRAM SCAN
Program Scan is similar to VFO Scan except that you
select the frequency range of the scan.
■ Setting Scan Limits
You can store up to 10 scan ranges in memory
channels L0/U0 to L9/U9.
1 Select the desired band.
2 Turn the Tuning control to display the desired
lower limit.
3 Press [F].
4 Turn the Tuning control to select a channel in the
range L0 to L9.
5 Press [MR].
• The lower limit is stored in the channel.
6 Turn the Tuning control to display the desired
upper limit.
7 Press [F].
8 Turn the Tuning control to select a matching
channel in the range U0 to U9.
• If you have selected for example L3 in step 4,
select U3.
9 Press [MR].
• The upper limit is stored in the channel.
10 To confirm the stored scan limits, press [MR], then
select the L and U channels.
Note:
◆ The lower limit must be lower in frequency than the upper limit.
◆ The lower and upper frequency steps must be equal.
◆ The lower and upper limits must be selected on the same band.