Kenwood TH-G71E - Manual (Page 57)

51
QUICK REFERENCE GUIDE
Function Key Operation
Ref.
Page
Automatic Power Off
(APO) ON/OFF [F], [BAND] ➡ Tuning control (Menu No. 5)
➡ [BAND] ➡ [F]
37
37
38
22
32
33
32
40
38
15
13
13
14
14
Battery Saver ON/OFF
[F], [BAND] ➡ Tuning control (Menu No. 4)
➡ [BAND] ➡ [F]
Beep ON/OFF
[F], [BAND] ➡ Tuning control (Menu No. 6)
➡ [BAND] ➡ [F]
Channel Display ON/OFF POWER OFF ➡ [BAND]+ POWER ON
CTCSS
ON/OFF Select band ➡ [F], [6]
Automatic Tone
Frequency ID ON
Select band ➡ [F], [6] (1 s)
Frequency Select Switch CTCSS ON ➡ [F], [9] ➡ Tuning control ➡ [F]
Frequency Step Size Select Select band ➡ [F], [MHz] ➡ Tuning control ➡ [F]
Lamp Latch ON/OFF [F], [LAMP]
Repeater
Automatic Offset (U.S.A./
Canada/ Europe only) [F], [BAND] ➡ Tuning control (Menu No. 7)
➡ [BAND] ➡ [F]
Offset Direction Select Select band ➡ [F], [REV]
Offset Frequency Select
Select band ➡ [F], [BAND] ➡ Tuning control (Menu
No. 8) ➡ [BAND] ➡ Tuning control ➡ [BAND] ➡ [F]
Tone ON/OFF Select band ➡ [F], [LOW]
Tone Frequency Select Switch Tone ON ➡ [F], [9] ➡ Tuning control ➡ [F]
Continued
Note:
◆ This guide covers only the
functions that require a small
number of operation steps.
◆ Some functions ask you to press
any key other than a couple of
keys to complete the setting or to
stop operation. In such a case,
one recommended key is given in
the table.