Kyocera EN - Manual (Page 33)

User’s Guide for the QCP 860, 1960, and 2760 Phones 23
To mute or unmute a call
1. During a call, hold or under [MENU] for about two seconds.
“MUTE” flashes on the screen. The other party will not hear anything you
say.
2. To unmute the call, hold or under [MENU] again.
To adjust the earpiece volume
• During a call, press the volume keys to adjust the volume up or down.
To adjust the ringer volume
• In standby mode, press the volume keys to adjust the ringer volume.
Setting the ringer type
1. Press or under [MENU].
2. Press 2 6 to choose Sounds > Ringer Type.
3. Press or under [NEXT] to cycle through the settings. Each ring
plays automatically.
4. Press or under [OK] to select the setting you want.