Sending or receiving data, Data and voice transmissions – Kyocera EN User Manual
Page 63
User’s Guide for the QCP 860, 1960, and 2760 Phones
53
SENDING OR RECEIVING DATA
Some service providers allow you to connect your phone to your computer
and use the phone line for email, Internet access, or fax transmission.
•
Digital mode: To receive data in CDMA digital mode, you can connect
your phone to a computer using a Kyocera data cable (available
separately). See “Setting up a data connection” on page 54.
•
Analog mode: To receive data in analog mode, you can purchase the
Kyocera Data on the Go
®
PC Fax/Modem Card to install in your computer.
To purchase these accessories, contact your service provider or visit the
Kyocera web site at http:\\www. kyocera-wireless.com/store.
Data and voice transmissions
Before using your phone to send or receive data, be aware of the following
considerations.
Due to infrastructure (network) limitations, there may be times when your
phone cannot determine if an incoming CDMA digital call contains voice or
data/fax information.