Kyocera EN - Manual (Page 75)

User’s Guide for the QCP 860, 1960, and 2760 Phones 65
8 5 Force Call (on QCP 860 Thin Phones only) forces the phone into analog
mode until the end of the next incoming or outgoing call, or for the next
ten minutes.
On QCP 2760 phones
8 2 Data/Fax determines whether the phone can receive both voice and data
calls, or just data calls.
– The off setting allows both if your phone network can distinguish
between voice and data.
– Fax for next call forces the next call into fax mode.
– Data for next call forces the next call into data mode. The “next call”
modes automatically reset to off after a fax or data call is received or
after 10 minutes if a call is not received in that time.
– Fax until power OFF forces the phone into fax mode.
– Data until power OFF forces the phone into data mode. The “until
power off” settings remain until you reset the menu to off or turn off
the phone.
8 3 Digital sets the phone to operate in digital mode, analog mode, or both.