Keys Fitness KF-E4.0 - Manual (Page 13)

13
www . keys
fitness.com
Assembly
8
ASSEMBLY FOR CONSOLE
Step 1:
Remove 2 screws (J1) from the back of the console.
Step 2:
Connect the pulse wires, sensor wires and the
toggle wires with the corresponding wires on the
console.
Step 4:
Gently slide the wires down the upright post and
secure the console (J) to the upright post (D) using
2 screws (J1).
D1-3
J
E2
D
R3
K1
K2
R5
S2
E2-1
R13
R14
J1
J
J1
ASSEMBLY FOR LEFT ROTATING HANDLEBAR
Step 1:
Attach the left rotating handlebar (E2) to the left rotating handlebar tube (S2) and
secure using 4 allen screws (R4), 4 spring washers (R13), and 4 flat washers (R14).
Step 2:
Connect the toggle wire (E2-1) with the toggle wire connection on the upright post
(D1-3).
ASSEMBLY FOR WATER BOTTLE HOLDER
Step 1:
Attach the water bottle holder (K2) and secure to
the upright post (D) using 2 screws (R5).
Step 2:
Place water bottle (K1) inside water bottle holder
(K2).
Use Tool
6mm
Use Tool
13mm
14mm