Keys Fitness KF-E4.0 - Manual (Page 9)

9
www . keys
fitness.com
Assembly
ASSEMBLY FOR RIGHT ROTATING
HANDLEBAR AND HANDLEBAR TUBE
Step 1:
Insert ring seal (R19) and flat washer (R23) into
the right arm joint of the upright post.
Step 2:
locate the right rotating arm (S1) and connect
it to the upright post (D) at the arm joint and
secure using allen screw (R8), spring washer
(R16) and flat washer (R21).
Step 3:
Attach the right rotating handlebar (E1) to the
right rotating arm (S1) and secure using 4 allen
screws (R3), 4 spring washers (R13), and 4 flat
washers (R14).
Step 4:
Connect the toggle wire (E1-1) with the toggle
wire connection on the upright post (D1-3).
4
D
E1
R3
E1-1
D1-3
R13
R14
D
R21
R16
R8
S1
R19
R23
D1-3
E1-1
S1
Use Tool
6mm