Keys Fitness KF-E4.0 - Manual (Page 8)

8
www . keys
fitness.com
Assembly
3
ASSEMBLY FOR UPRIGHT POST
Step 1:
Insert the upright post cover (H) into the upright post (D) from the bottom side.
Step 2:
Connect the lower sensor wire (A2) with the upper
sensor wire (D2).
Step 3:
Mount the upright post (D) to the main frame (A) and secure using 4 screws
(R7), 4 spring washers (R13), and 4 flat washers (R14).
Step 4:
Slide the upright post cover down to conceal tube connection.
H
D
A
D2
A2
R7
R13
R14
G1-1
D1-2
D
G2 R6
G2
G1
Use Tool
6mm
Use Tool
5mm
ASSEMBLY FOR STATIONARY HANDLEBARS
Step 1:
Connect the pulse wire (G1-1) from the left handlebar (G2) to the pulse wire (D1-2) from the upright post (D).
Step 2:
Attach the left stationary handlebar (G2) to the left handlebar mount on the upright post (D) and secure using screws (R6).
Step 3:
Repeat steps 1 and 2 for the right handlebar (G1).