Kodak DCS 700 - Manual (Page 220)

13-5
13
T
ram
s
m
it
ting
Serial Out Mode
When the serial port is in Serial Out mode, your camera sends data to a remotely
connected device.
☛
Serial In and Serial Out modes can work at the same time.
1 Select Serial Out from the Serial
Port menu (page 13-2).
2 Select your choice from the
Serial Out Mode menu
(described in the table below).
The setting is retained until you
change it.
Menu Choice Action Comments
None No data transmitted.
Image Number A text string containing the image
number of the just-captured image
is sent to the connected device.