Kodak DCS 700 - Manual (Page 73)

3-10
If your battery charger does not function as expected, check the following:
✔ The wall adapter is properly connected.
✔ There are no foreign objects lodged in the pockets.
✔ The batteries are inserted so that they properly mate with the connector in the
bottom of the pocket.
☛
No harm will come to your batteries if you leave them in the charger for an extended
period of time.
6 Insert one or two batteries in the
slots in the battery charger.
☛
If you are charging one
battery, you can use either slot.
On average, a battery is charged
in approximately one hour. If
two batteries are inserted, they
are charged simultaneously.
7 Once the green light turns on,
wait two hours, then remove the
batteries from the charger.
If you do not wait, batteries will
only be charged to 80% of
capacity.
8 Insert a charged battery into the
camera.
9 Close the camera door.
The Battery icon is displayed on
the Back Status LCD panel
when a battery is in the camera,
the camera is turned on, and the
camera is not in PowerSave
mode (page 3-12).
☛
The Battery icon is not
displayed if the AC adapter is
connected.
REAR
SLOW
AUTO
ISO
BKT CUSTOM