Kodak DCS 700 - Manual (Page 25)

1-6
✔ Humidity, Condensation—We recommend operating your camera within the
range of 8% to 85% relative humidity, non-condensing. If condensation occurs,
added time may be required to read from or write to a PC Card. Condensation may
be present if the camera system and/or PC Cards are moved from a relatively cold
environment (like an air-conditioned hotel room) into a warm, humid environment.
We recommend that you allow sufficient time for the camera system and/or PC
Cards to normalize within the specified environmental ranges before operation.
(PC Cards may have more restrictive humidity ranges. Refer to the specifications
accompanying your PC Cards.)
✔ Servicing—Do not attempt to service your camera yourself. Opening or removing
covers may expose you to dangerous voltage or other hazards and void the
warranty.
✔ Damage Requiring Service—Unplug your camera from the wall outlet and
computer, and refer all servicing to the manufacturer under the following
conditions:
•
If liquid has been spilled or if objects have fallen into your camera.
• If your camera has been exposed to heavy rain or water. (While it is designed to
tolerate a reasonable amount of water, your camera is not waterproof.)
• If your camera does not operate normally according to the operating
instructions.
• If your camera has been dropped or the housing has been damaged.
• When your camera exhibits a distinct change in performance.
✔ Disassembling the Camera—Never attempt to take the camera apart. The camera
is shipped as a single unit. Do not disconnect the parts (except when cleaning a
dirty anti-aliasing filter or imager).