Kodak DCS 700 - Manual (Page 62)

2-35
2
Y
o
u
r Ca
me
ra
Software Overview
There is a DCS Host Software CD included with your camera. On the CD are two
programs:
✔ KODAK PROFESSIONAL DCS Camera Manager: Allows automatic transfer of
captured images from DCS 700 Series Camera memory to your computer when the
camera is connected using the IEEE 1394 interface. You can also view and change
camera properties on the connected camera, and copy or move images to the
computer from a folder on a PC Card in the camera.
✔ KODAK PROFESSIONAL DCS Photo Desk: Allows you to open, edit, process,
and save images captured on a DCS 700 Series Camera after transferring the
images to the computer. You can also save images, then open them directly in
another image editing application.
Refer to the on-line help associated with each program for more information.
Name Plate
The Name Plate property, accessible by the KODAK PROFESSIONAL DCS Camera
Manager, allows you to enter text that appears in certain screens on your camera. The
Name Plate is useful for personalizing your camera, for example, “This camera belongs to
Joe Smith”.
Refer to the documentation on the included DCS Host Software CD.
The text appears in the following screens on the camera’s Image LCD:
✔ No images in folder
✔ No images in memory
✔ No card in camera