Kodak SCIENCE 1H9659 - Manual (Page 18)

Calibration Utility for MICROSOFT WINDOWS
1–10 September 1997 Part No. 1H9659
4. Click on the Next >> button.
The Easy Cal Step 3 dialog box appears.
Easy Cal Step 3
The Easy Cal Step 3 dialog box allows you to specify a different printer
media to calibrate than the one that appears in the
Printer Setup box.
1. Make sure that the paper and media types for which you want to
calibrate are loaded in the printer.
NOTE: If you do not need to specify a different printer media, you can
ignore the following steps and click on the Next>> button in
the Easy Cal Step 3 dialog box and go to “Easy Cal Step 4.”
2. Click on the Change Setup... button.