Kyocera Tempo E2000 - Manual (Page 35)

User Guide 27
– Multishot allows you to take up to six
multiple pictures while the camera key is
pressed and held. A tone will play each
time a picture is taken. A second tone will
play when the final picture is taken.
– Shutter Sound sets the sound used when
the camera takes a picture.
– White Balance adjusts for different
lighting.
– Color Tone sets the color tone of the
picture.
– Quality sets the picture compression. The
higher the compression, the better the
detail of the picture (higher pixel rate).
When set to
High , the picture file size is
larger, using more memory.
– LED flashes a light to indicate a picture
has been taken. Options are On and Off
(default).
– Save Location choose whether to save
new pictures to the phone or memory
card.
• Video Mode toggles between video and
camera modes.
• Brightness adjusts the brightness of the image
in the home screen LCD.
• Camera Pictures displays all pictures taken
and stored.
• Last Picture displays the most recently taken
picture.
• Frames adds a frame or a stamp to your
picture. A frame or stamp cannot be removed
once it has been used in a picture. The picture
resolution changes to 160 x 120 while taking
pictures with frames. The resolution returns
to the original setting once Frames is disabled.
Note: The following settings will revert to the
default setting each you exit the camera
application:
Low Light Mode , Self Timer , and
MultiShot .
Record a video
To record a video:
1.
Activate the camera one of the following
ways:
– Press the
Camera key until you hear two
beeps.
– Select Menu > Camera .
2. Select Options > Video Mode .
3. Focus on the image using the phone’s display
as a viewfinder.
4. Select Record . You can do the following
while recording:
– Scroll up or down to zoom in and out.
– Select
Pause to pause recording.
– Select Resume to resume recording.
5. When you are finished recording, select
Stop . The recording is saved to your Video
Album.
6. Press the End key to exit video mode.