Kyocera Tempo E2000 - Manual (Page 9)

User Guide 1
1 G
ETTING
S
TARTED
Phone battery
Install the battery
To install the battery:
1.
Hold the phone
face down.
2. Find notch on bottom
of the phone. Pull the
cover off.
3. Place the battery in the
phone casing with the
metal contacts facing
towards the bottom of
the phone.
4. Replace the battery
door by sliding the
notches into the
openings at the top the
battery casing.
5. Snap the cover into
place.
Charge the battery
You must have at least a partial charge in the
battery to make or receive calls.
To charge the battery:
1.
Connect the AC adapter
to the microUSB jack
on the side of the
phone.
2. Plug the adapter into a
wall outlet.
The battery icon in the upper-right corner of the
screen tells you whether the phone is:
• Charging (the icon is animated)
• Partially charged
• Fully charged
Warning: The battery will not charge if you use
the phone while it is connected to an AC adapter.
Recharge the battery
You can safely recharge the battery at any time,
even if it has a partial charge.
Note: Before removing the battery, make sure the
phone is powered off.
Battery care
General safety guidelines
• Do not disassemble or open the battery.
• Do not crush, bend, deform, puncture, or
shred the battery.