Kyocera Tempo E2000 - Manual (Page 59)

User Guide 51
you can speak the command after you hear a
tone.
Select
Menu > Settings > My Phone > Voice
Features > Expert Mode and one of the
following:
•
Normal sets phone to default voice prompts.
• Expert sets phone to sound tones instead of
voice prompts.
Display results
You can set the phone to display up to three
recognition contacts when calling or searching
for a contact with voice commands.
Select
Menu > Settings > My Phone > Voice
Features > Display Results > Single Best or
Three Best .
Digit lengths
You can set the number of digits used for a phone
number in your voice dial list.
Select
Menu > Settings > My Phone > Voice
Features > Digit Lengths and one of the
following:
•
North American allows 7, 10, and 1 + 10
digits in a phone number.
• Permit All allows 4-14 digits in a phone
number.
Voice answer
You can set your phone to answer a call
automatically when using a hands-free.
Enable voice answer
Select
Menu > Settings > My Phone > Voice
Features > Voice Answer > With Accessory .
To use the voice answer feature, you must disable
the Auto-Answer feature (see
“Auto-answer” on
page 56 ) and set the phone to normal sounds
(see “Ringer mode” on page 45 ).
Use voice answer
When you receive an incoming call, the phone
prompts you with a voice recording. If the caller
is recognized as a contact entry in your phone,
then the phone prompts “Incoming call from
(Name), answer?”
Say “Yes” or press any key except the
End key to
answer.
Say “No” and press the
End key to silence the
alert. Remain silent. The voice alert repeats twice
and the phone rings once, then returns to the
home screen.
Voice wake-up
You can set your phone to make a call using a
hands-free.
Enable voice wake-up
Select
Menu > Settings > My Phone > Voice
Features > Voice Wake-Up > With Accessory .
Use voice wake-up
To wake up the phone:
1.
Say “Wake Up” and listen for a tone.