Kenwood DVT-7300 - Manual (Page 12)

12
DVR-6300 (EN/K,P,E,X)
Preparations
OUTPUT DIGITAL OUT
L
R
AUDIO
VIDEO
IN OUT DIGITAL OUT
L
R
AUDIO
VIDEO
Connecting to Audio video equipments
DTS disclaimer clause
DTS Digital Surround™ is a discrete 5.1 channel digital audio format available on CD, LD, and DVD software which
consequently cannot be decoded and played back inside most CD, LD, or DVD players. For this reason, when DTS-
encoded software is played back through the analog outputs of the CD, LD, or DVD player, excessive noise will be
exhibited. To avoid possible damage to the audio system, proper precautions should be taken by the consumer if the
analog outputs are connected directly to an amplification system. To enjoy DTS Digital Surround™ playback, an external
5.1 channel DTS Digital Surround™ decoder system must be connected to the digital output (S/P DIF, AES/EBU, or
TosLink) of the CD, LD or DVD player.
This unit is equipped with DTS Digital Surround™ decoder.
System Connections
VCR or DVD recorder
Satellite tuner
Audio/video cord
(Commercially
available)
Optical cable (Commer-
cially available)
Audio/video cord
(Commercially
available)
Optical cable (Commer-
cially available)
When the equipment connected to VIDEO1 or VIDEO2 of this unit
has an optical digital output, an optical cable can be used for con-
nection. (Only VIDEO1 or VIDEO2 can be connected.)
*5476/09-14/EN 04.7.27, 2:05 PM 12