Kenwood DVT-7300 - Manual (Page 25)

25
DVR-6300 (EN/K,P,E,X)
Operations
TUNER/BAND
PRESET
8 / ST/MONO
4 TUNING ¢
Receiving broadcast station
It is also possible to receive them by one-touch operations
by storing up to 30 stations in the preset memory. (
§ )
When the key is pressed, this unit will be switched on
automatically.
Select the TUNER input
1
REMOTE
Select the broadcast band
2
Each press changes the band.
1 FM
2 AM REMOTE
Select a tuning mode
3
Each press switches the mode
1 “STEREO” : stereo mode
2 “MONO” : monaural mode
Select a station
4
P.CALL (preset call) Auto tuning Manual tuning
REMOTE
MAIN UNIT
Each time a key is pressed, the frequency
is changed by one step.
Use the manual tuning mode when re-
ception is noisy due to weak reception.
Press the TUNING ( 4/¢) keys on
the main unit for more than 2 sec-
onds to receive the next tuned sta-
tion automatically
Press the PRESET ( 5/∞) keys on the re-
mote control to select a preset station.
In case of input with the numeric keys.
(Example)
To select preset No.3 : 3
To select preset No.14 : 14
(within 3 seconds)
MAIN UNIT
Band display Preset number
Tuning indication
Stereo tuning indication
Frequency display
MAIN UNIT
Press the TUNER/BAND key on the remote.
Press the TUNER/BAND key on the remote.
Press the 8 / ST./MONO key on the remote.
or
Numeric keys
*5476/23-28/EN 04.7.27, 2:05 PM 25