Speaker setting, Settings, Positioning the speakers – Kenwood DVT-7300 User Manual

Page 22: Speaker level (volume), Speaker selection, Volume, Test, Return, Operation near a tv, Set up functions

Advertising
background image

DVR-6300 (EN/K,P,E,X)

Set Up functions

22

Preparations

Disc Subtitle

Disc Menu

Rating

Country Code

TV Aspect
Menu Language

Progressive Scan

5.1 Speaker Setup

Others

Disc Audio

R

R

Front L

Volume 0 dB

Size Small

Distance 1 ft

Test

Return

Note

Note

Note

Note

Positioning the speakers

To achieve the optimum effects obtainable with this
SURROUND SOUND system, it is important to posi-
tion the speakers properly. Refer to the following
illustration to find the best location in your room.

Speaker setting

Speaker level (volume)

For this unit, the speaker levels have been set in
advance so that the best volume balance is obtained
with standard use.

Initial set values for the speaker level

Front Left channel

: 0dB

Center channel

: 0dB

Front Right channel

: 0dB

Rear Right channel

: 0dB

Rear Left channel

: 0dB

Subwoofer(SW)

: 0dB

Front R speaker

Front L speaker

Sub woofer

Center speaker

Rear L speaker

Rear R speaker

Settings

Reset as follows to match your listening environment.

1 Press SETUP key to display the menu.
2 Select "5.1 Speaker Setup" on the setup menu

then press the Cursor right (

3) key.

3 Press the Cursor right (3) key to select the de-

sired speaker.

4 Adjust options by using Cursor (5//2/3) keys

on the remote.

Speaker selection

Select a speaker that you want to adjust.

Front speakers (Left), Front speakers (Right), Cen-
tre Speaker, Rear speakers (Left), Rear speakers
(Right), or Subwoofer

Certain speaker settings are prohibited by
the Dolby Digital licensing agreement.

Volume

Press the Cursor left/right (

2 / 3) keys on the remote

to adjust the output level of the selected speaker.
(-6dB ~ +6dB)

Size

Since the speaker settings are fixed, you cannot
change the settings.

Distance

Setting the Distance lets the speakers know how far
the sound has to travel to reach your set listening
point. This allows the sound from each speaker to
reach the listener at the same time. (1 ft = 30.48 cm)
(0.3 m ~ 6 m, 1 ft ~ 20 ft)

You can not set the distance of subwoofer speaker.

Test

Press ENTER to test the signals of each speaker.
Adjust the volume to match the volume of test sig-
nals memorized in the system.

Front Left (L)

= Centre= Front Right (R) =

Rear Right (R)

= Rear Left (L) = Subwoofer

Return

Press ENTER to return to the previous menu.

Operation near a TV

If the Subwoofer is installed near a TV set, the TV

reception may be affected and interfered with color

irregularities. Should color irregularities observed

on TV screen, separate the Subwoofer from the

TV until its reception becomes normal.

Note

Note

*5476/20-22/EN

04.7.27, 2:05 PM

22

Advertising
This manual is related to the following products: