Kenwood DVT-7300 - Manual (Page 24)

24
DVR-6300 (EN/K,P,E,X)
Operations
POWER/ON STANDBY
INPUT
SELECTOR
VOLUME CONTROL
POWER
VOLUME
MUTE
3/[INPUT SELECTOR]
PHONES
Let's put out some sound
Preparation
Basic use method
Selecting the desired input
1
2
Muting the sound temporarily
Listening through headphone
REMOTE MAIN UNIT
REMOTE MAIN UNIT
To decrease To increase
To decrease
To increase
÷ Press again to resume the original volume.
÷ The sound muting is also cancelled when the volume is con-
trolled.
÷ Press MUTE key.
Insert the headphone plug into the PHONES jack.
÷ The sounds from all speakers are cut off.
This unit offers various surround modes, but it switches
automatically to stereo mode when headphones are connected.
1 CD/DVD ª
2 VIDEO 1 (audio, video)
3 VIDEO 1 (video) + OPT (digital audio input)
4 VIDEO 2 (audio, video)
5 VIDEO 2 (video) + OPT (digital audio input)
6 TV-AUDIO (for Europe, input from SCART cable)
7 FM (frequency display)
∞
8 AM (frequency display) ∞
REMOTE
Turn on the POWER.
÷ The power will be switched on and the respective operation will
be performed also when the 0 0 0 0 0 key on the main unit is pressed
during STANDBY mode.
÷ When a disc is set in the disc tray and the CD/DVD key is pressed,
disc playback will start automatically.
Normally "VOL MAX" is displayed when the volume settings
set to the maximum value.
Volume adjustment
1 Press ‰/[INPUT
SELECTOR] key for
more than 3 seconds.
2 Press ‰/[INPUT
SELECTOR] key
repeatedly.
each press switches
the mode.
After press
‰/[INPUT SELECTOR] key for more than 3
seconds, each press
‰/[INPUT SELECTOR] key switches
input modes as shown below.
When press VIDEO 1/2 key
on the remote, switches
input modes as shown below.
1 VIDEO 1 (audio, video)
2 VIDEO 1 (video) + OPT
(digital audio input)
3 VIDEO 2 (audio, video)
4 VIDEO 2 (video) + OPT
(digital audio input)
5 TV-AUDIO (for Europe,
input from SCART cable)
*5476/23-28/EN 04.7.27, 2:05 PM 24