Knoll Systems HD102 - Manual (Page 15)

15
Table 1: LED behavior and meaning
LED color/behavior Meaning
Solid Green The power switch has been toggled on
and the software has initialized or the
projector has been powered off via the
remote.
Blinking Green The power switch has been toggled on
and the software is initializing, or the
projector is powering down and the fans
are running to cool the lamp.
Blinking Red
See page 18 for more information
A fan or lamp failure has occurred. Make
sure the vents aren’t blocked (see page
18). Turn off the projector and wait one
minute, then turn the projector on again.
If the projector exceeds its lamp life (page
25), replace the lamp and reset the lamp
timer. Contact Technical Support if the
problem persists.
Solid Red
An unidentifiable error; please contact
Technical Support.
The following tables show common problems. In some cases, more than one possible solution is provided.
Try the solutions in the order they are presented. When the problem is solved, you can skip the additional
solutions.