Knoll Systems HD102 - Manual (Page 22)

22
Picture menu
To adjust the following settings,
highlight the setting, press
Select, use the up and down
arrows to adjust the values, then
press Select to confirm the
changes.
Keystone: adjusts the image
vertically and makes a squarer
image. You can also adjust
keystone from the keypad.
Contrast: controls the degree of difference between the lightest and darkest parts of the picture and
changes the amount of black and white in the image.
Brightness: changes the intensity of the image.
Color: adjusts a video image from black and white to fully saturated color. The color setting applies to video
sources only.
Tint: adjusts the red-green color balance in the image of NTSC video images. The tint setting applies to
NTSC video sources only.
Aspect Ratio: Aspect ratio is the ratio of the image width to image height. TV screens are usually 4:3.
HDTV and most DVDs are 16:9. The projector’s default is 16:9. See “What is Aspect Ratio?” on page 11 for
more information.
Select Native to see the unmodified input with no
resizing by the projector.
Select 16:9 to watch enhanced widescreen DVDs.
For more information regarding Aspect Ratio, see page
11.
Presets: Presets are provided
that optimize the projector
for displaying computer
presentations, photographs, film
images, and video images. Film
input is material originally
captured on a film camera, like
a movie; video
input is material originally
captured on a video camera,
like a TV show or sporting
event. You can use the preset
as a starting point, then further
customize the settings for each source. The settings you customize are saved in the preset for each source.
To restore the factory default settings, choose Factory Reset in the Settings>Service menu (page 24).
There is also a user-definable preset. To set a preset for the current source, adjust the image, select Save
User in the Presets menu, then select Yes. You can recall these settings in the future by selecting the User
1 preset.
Advanced menu
Chroma Detail: This adjusts the color sharpness.
Luma Detail: This adjusts the overall sharpness (edge
enhancement) of the Luma signal.
Noise Reduction: adjusts signal noise reduction.
Choose Off to have no noise reduction, choose Auto
to have the software determine the amount of noise
reduction, or choose Manual and adjust the Level.