Important operating considerations for safety – Knoll Systems HD102 User Manual
Page 4
4
Important Operating Considerations for Safety
• Place the projector in a horizontal position no greater
than 15 degrees off axis.
• Locate the projector in a well-ventilated area without
any obstructions to intake or exhaust vents.
• Do not place the projector on a tablecloth or other
soft covering that may block the vents.
• Locate the projector at least 4' (1.2 m) away from any
heating or cooling vents.
• Use only Knoll-approved ceiling mounts.
• Use only the power cord provided. A surge-protected
power strip is recommended.
• Refer to this manual for proper startup and shutdown
procedures.
• In the unlikely event of the lamp rupturing, discard
any edible items placed in the surrounding area and
thoroughly clean the area along all sides of the
projector.
•
Wash hands after cleaning the area and handling the
ruptured lamp. This product has a lamp, which
contains a very small amount of mercury. Dispose of
it as required by local, state or federal ordinances and
Follow these instructions to help ensure image quality and lamp life over the life of the projector.
Failure to follow these instructions may affect the warranty. For complete details of the warranty,
see the Warranty section at the end of this User's Guide.