Slide burning & picture flicker, Explanation & remedy lamp adjustment solution – Kodak 560 User Manual

Page 20

Advertising
background image

Slide burning and picture flicker are problems common to Xenon projec-

tors. The following is an explanation and remedy for these problems

which can occur in any Xenon projector that is not adjusted properly.

1. Both problems, slide burning and picture flicker, are usually caused

by the same thing

a misalignment of the Xenon lamp position.

2. If the slide or the slide mount is burning, this is definitely caused by

a misalignment of the Xenon lamp position.

3. The flickering is caused by the physical nature of the Xenon lamp

itself. Navitar has incorporated a magnet assembly above the lamp

to solve this problem.

Before you try to fix either problem caused by misalignment of the Xenon

lamp, please read the sections “Installing a New Lamp” and “Adjusting

the Lamp Position.”

Proper adjustment of the three external lamp adjustments will provide a

brilliant and uniform illumination without any hot spots on the screen.

When this adjustment is done properly, the flickering may correct itself.

The Xenon lamp contains two probes inside a quartz envelope contain-

ing Xenon gas. When a very high current and voltage is introduced

across these probes, the Xenon gas is ionized and an arc of light is

produced between the probes. Within the envelope, there are some

heavier ions which will jump back and forth between the brilliant light

path between the probes. This jumping of heavier ions is what produces

the flickering.

Your Navitar Xenon projector has a built-in magnet assembly which is

placed across the ellipsoid mirror in the lamp area. This pulls the

heavier particles (ions) to one side so that their path is in step with the

main stream of light, stopping the flicker.

This means that if the lamp positioning is not correct, the lamp may have

been pulled away from the magnetic force that draws these heavy

particles to the main stream of particles. Therefore proper lamp adjust-

ment for even illumination and brilliance should fix both of these prob-

lems.

Explanation & Remedy

Lamp Adjustment

Solution

Slide Burning & Picture Flicker

18

Advertising
This manual is related to the following products:

750