Konica Minolta IC-401 - Manual (Page 13)

1.3 Screen Configuration
1-6
Usi
n
g
Pa
geS
co
pe W
e
b
Con
nec
tio
n
Chap
ter
1
1.3.1 Logging in Using the Administrator
Mode
By logging into PageScope Web Connection in the Administrator Mode, you
can configure or confirm the image controller system.
1.
Enter the administrator password into the “Admin Password” box at the
upper left corner of the screen.
2. Click [Log-in] to log in using the Administrator Mode.
3. To log out, click [Log-out].
Note
• You can change the administrator password using [Admin. Mode] on the
copier. The default value is 0000.