1 enabling the ftp transfer function, 2 proxy settings, 1 enabling the ftp transfer function -31 – Konica Minolta IC-401 User Manual
Page 84: 2 proxy settings -31, E p. 2-31, P. 2-31
2.11 Scan to FTP Server Function
2-31
Us
in
g th
e S
c
a
nner
M
ode
Ch
apte
r 2
2.11.1 Enabling the FTP Transfer Function
1.
Show the setup screen from the controller operation panel.
2.
Select [Network Setup] — [Service Setup] — [FTP Setup] and enter the
following settings.
[Enable FTP Services]:
Select “Yes”.
2.11.2 Proxy Settings
Enter proxy settings as necessary. (Consult your network administrator to see
if proxy settings are required and the setup details.)
1.
Show the setup screen from the controller operation panel.
2.
Select [Network Setup] — [Service Setup] — [FTP Setup] and enter the
following settings.
[Enable Proxy Setup]:
Select “Yes” to enable the proxy settings.
[Proxy Server IP Address]:
Enter the IP address of the proxy server.
[Proxy Server Port Number]:
Specify the port number of the proxy server.
[Proxy Server Timeout]:
Set the timeout value.
[Proxy Server User Name]:
Enter the user name of the proxy server.
[Proxy Server User Password]:
Enter the password of the proxy server.