Konica Minolta IC-401 - Manual (Page 70)

2.3 Setup Items for Scanning
2-17
Us
in
g th
e S
c
a
nner
M
ode
Ch
apte
r 2
2.3.5 Checking the Settings on the
Destination Device
Press the [Check] button to view the settings on the destination device.
2.3.6 Registering the Scan Mode Default
Settings
You can arbitrary specify the default settings of the Scan Mode.
1.
Press the [Scan] key on the copier operation panel to enter the Scan
Mode.
2. Select the setting to make the default value in the Scan Mode.
3. Press the [Utility] key.
4. Touch [Store].
5. Touch [Reset Mode].
6. Touch [Current Mode].
7. Touch [Enter].
You can set the default settings of the Scan Mode to factory default by
touching [Factory Default].